The Widespan Structural System employs solid-web primary frames, factory punched acrylic coated, pre-punched secondary structural members (Z sections) and rod bracing in the roof and walls to form an attractive and economical building solution with the length, width, height and roof slope you require.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF
  

The Landmark™ 2000 structural system employs solid-web primary frames, factory punched truss purlins, and rod bracing in the roof and walls to form an attractive and economical long bay framing system. The special truss purlin (an open-web secondary structural member) system is exclusive to Butler.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF
  

The MR-24® standing seam roof system is a 24” wide trapezoidal cross section designed to accommodate thermal expansion and contraction. Introduced in 1969, the MR-24® Roof system has provided consistent, weathertight performance. Factory punching of secondary structural members assure precise alignment.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

 

 

The CMR-24® roof system offers all the benefits of the MR-24® roof system, with the addition of a layer of rigid insulation board and an interior steel liner.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

The VSR™ roof system is a versatile standing-seam roof system designed exclusively for architectural applications.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

Butlerib® II is the thru-fastened roof system for the Widespan™ structural system.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

The Sky-Web® and Sky-Web II® systems protect workers from falls, and Sky-Web® can protect from certain falling objects during roof construction. Both are easy-to-install methods of increasing safety and efficiency, and both remain in place after the building is complete, serving as insulation support systems.

Sky-Web® does not eliminate fall hazard from the non-leading edge of the roof and during installation.

• Sky-Web® Descriptive Specs: Click here
• Sky-Web II® Descriptive Specs: Click here

 

StylWall® II Flat or Fluted wall panels feature an outside surface embossed with a stucco pattern. Each panel is fastened to the wall structural system and then “locked” into the adjacent panel, concealing the fasteners and enhancing the building’s appearance.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

The Shadowall™ wall system is ideal for creating architecturally pleasing exteriors, particularly in instances where energy efficiency is a key concern.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

 

With an attractive combination of quality and affordability, the Butlerib® II wall system remains an extremely popular choice for virtually any type of building application.

• "Descriptive Specs" (with ButlerŪ trade names): Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF

 

TextureWall™ panels have an exterior flat embossed surface that creates a stunning stucco appearance. The surface is created by the Texture-Cote™ finish system—a hard aggregated fiber- reinforced polymer finish that resists the effects of impact, abrasion, and weather.

• "Descriptive Specs" (with ButlerŪ trade names): Click here

The Butler Thermawall™ wall system is a factory-insulated wall system with concealed fasteners for a clean, attractive appearance. Panel thicknesses of 2, 2-1/2, 3, and 4 inches are available to match your thermal performance needs, with R-values ranging from R-16 to R-32. The system is UL certified for 1- or 2-hour fire resistance assembly and also FM Global approved—which can help lower insurance costs.

• Descriptive Specs: Click here
• "Performance Specs" (without trade names): Microsoft Word • Adobe .PDF